НА САЙТЕ ВЕДУТСЯ РАБОТЫ. ВОЗМОЖНЫ СБОИ, НЕКОРРЕКТНОЕ ОТОБРАЖЕНИЕ. ОКОНЧАНИЕ 20.08.2019

Случайная статья узнай что то новое



And so you have chip, there is a place where it is inserted into the OBD1 brain. You can even create a firmware that gives you gains using the program Crome. Now, how to burn it to a chip to go with it?\nI said before that is programmable 29C256 and 27C512 - only memory parallel programmer, which is not in every home. There are several solutions:

the
    the
  • to Buy a programmer, the price of about 50-300$. To use it will be a maximum of 10-15 times.
  • the
  • to Solder myself a parallel programmer under the scheme of the Internet, the lesson hard and, for a beginner, not grateful.
  • the
  • to Find a TV repair shop, which, for $30 or less, might 1 time to flash the chip.
  • the
  • to Buy 10-100$ a parallel programmer, which has already become old at a flea market or on the Internet, such as PicProg+

The first two points I dropped. Since I knew I prosus a minimum of 5 and maximum of 10 times. And pay one chip $200 I wanted.\nA second option for me is complicated, maybe Im a bit lazy. I just dont have enough time to deal with a new programmer. Although there are kits, cheap enough that you can weld for 1-2 hours.\nFind the TV repair shop did not work, this stuff as our memory chips do not need anyone. I know exactly what market radio type Tsaritsyno or Mitino in Moscow such services is, but something I did not want 5 firmware each time to pay $10-20. So I moved on to paragraph 4.\nI found the resetter PicProg+ online for $30, the basic problem on which to sell this programmer is\nwhat firm Phyton is no longer supported (Since 2002) this programmer, \nand a program through which runs the programmer does not go to any Windows XP, Vista, Seven and even more. These systems do not support full access to the LPT port.

Programmer Picprog+ for flashing 29C256 and ECU 27C512

General view of the PicProg+ for firmware Honda Civic P28

the

Option 1: run under MS-DOS

This is the most brutal and the correct way to work with this programmer. You need a programmer, flashcards USB no bigger than 2GB, and any computer with a working LPT port. \nto start download \nthe program HP USB Disk Storage FormatTool, \narchive floppy Windows98 and crippled archive program PicProg. Unzip each into their own folder.\nInsert the USB drive into the computer, clean it from files. Run HP USB Disk Storage FormatTool.
PS Now I checked this page and Google Chrome said my files were safe. I re-checked it with AVG antivirus, all right. I use this\nlong enough.

the
    the
  • check the box Quick Format
  • the
  • check the box Create a Dos startup disk
  • the
  • Below select the folder with the files from the archive Shell98
  • the
  • Click Start
  • the
  • At the end of the process, close the program and go to the location of the stick
  • the
  • Create a folder PP and throw back all the files from the archive Picprog-Phyton.zip

Everything is ready. Now you have a working bootable flash drive with the program Picprog on Board. Remains to install the flash drive into the computer, set the BIOS boot mode \nwith the flash drive and boot from it. when you see similar to the C:\, write cd pp, and then picprog. Instructions for use Picprog+ in the last\nparagraph of the article.

the

Option 2: Sew under Windows XP, Seven, Vista, Linux

Better do not suffer and get the universal programmer MiniPro TL866CS. And yet, if you have a programmer PicProg+ with LPT port and is already connected to your computer.\nIf you do not want to leave my cozy window your system 32 or 64 bit, then install Virtual Machine Player. \nThat is, the virtual DOS machine, but dont forget in the options to transfer the management of LPT from a physical computer to a virtual system. Everything else is as in option 1.\nThe main thing that your CPU supported virtualized mode. For example, I came across Intel Pentium 4 650 which does not have this mode, and VMware Player was not even installed.\nP. S. If you are not running VMware Player 4 or VMware Player 5, just find VMware Player 3.

instructions for the PicProg+ Phyton

Of course I give cut-down the manual and stripped-down program,for our purposes, namely to record-count lot no need. First first you need to choose the chip \npress F2, select Parallel E(E)PROM, and select need a memory chip. I very much hope that you AT29C256, so feel free to choose item 27. You are now ready to\nto read or write. If you want to read the firmware, press ALT-F4, then save by pressing ALT-F8 and write any name. The firmware will be saved in the root of the program and should weigh\nexactly 32768 bytes, or 8000h.
To write firmware you need to initially put the firmware in the root of the program. Select the type IC ALT-F4, click ALT-F9 \nand write the name of the file exactly with the extension (usually .BIN). Next the program asks about the format of the file, you can choose Binary. In order not to suffer \nwith the name of the firmware call just for myself (1.bin). And finally, you need to write in the chip, ALT-F3. After not forget to check the file you downloaded and what you have now recorded\nfirmware by pressing ALT-F5.
If at the time of reading or writing you will have some errors, stop the process and not leaving the program try to move the chip. 28 feet is enough \nusually all the errors are linked to poor contact.

Picprog+ Phyton programmer WindowsXP \n

Случайная статья узнай что то новое

Данная статья актуальна для автомобилей Honda выпуска 1992-2000 годов, таких как Civic EJ9, Civic EK3, CIVIC EK2, CIVIC EK4 (частично). Информация будет актуальна для владельцев Honda Integra в кузовах DB6, DC1, с моторами ZC, D15B, D16A.

Главная страница

Соц. Сети

Календарь событий

  • Автоэкзотика - 1 мая
  • Jap Days - 22 Июня
  • JAP CAR FEST - 19-21 июля

Клубные встречи

  • Москва
  • Санкт-Петербург
  • Минск
  • Уфа

Партнеры EJ9.Ru

EJ9 и EK3 — записки инженера о Honda Civic 1998. 2010 – 2019 . Вся информация приводится для ознакомления, автор не несет ответственности за вред полученный в результате применения материалов сайта, находясь на сайте вы подтверждаете своё согласие с этим. Сделано Хондоводом для Хондоводов. Автор: Илья Серб Все изображения имеют авторство Карта сайта Honda Civic, всем VTEC!

Rambler's Top100 Valid XHTML 1.0 Transitional